HERMA BASIC
HERMA BASIC
HERMA BASIC

Share:


HERMA BASIC

Specifications

Label roll core: Core 76 mm (optional: 40 mm, 45 mm)

Available label sizes: 12 x 12 mm to 160 x 400 mm; single-layer and multi-layer labels with a label thickness of up to 1.5 mm

Max. backing tape width: 164 mm

Label roll diameter: 300 mm (winding: inward/outward)

Max. speed: Adjustable up to 25 m/min

Label stop accuracy: ± 0.8 mm

Clearance: 300 mm (suitable for integration in printers e.g. hot foil printers)

Unwinder: Mechanical

Winder: Mechanical (regulated)

Design: Left-hand and right-hand version

Label stop sensor: Forked light barrier for non-transparent labels; optional FS03 sensor can be used for transparent labels

Control panel: Keypad with display; languages available: German, English, French, Spanish

Controller: Integrated in the applicator

IP protection type: IP 40

Power connection values: 110 / 240V AC ±10%, 50 / 60 Hz; wide voltage input (automatic adjustment) available power cords: type B NEMA 5-15, 3-pin/ type E+F CEE 7/7

Mounting: Mounting points identical to those of HERMA 400

Label transfer: Adjustable: rigid dispensing plate with brush, roller or spring-mounted roller or optional pneumatic pivot beak

Fault display: Shown in the display

Certification:
CE conformity


Reliable, rugged and precise with standard applications

The HERMA basic works at a speed of up to 25 m/min: this can be adjusted using the keypad and display. Its integrated controller means there is no need for an additional switch cabinet. Label sizes can be adjusted from 12 x 12 mm to 160 x 400 mm.

Versatile solution to new challenges

The HERMA basic is fitted with mounting points that are identical to those of the HERMA 500. If special applications or higher speeds are required, it is easy to switch to the more powerful applicators of the HERMA 500 family.

Buy accessories and parts for the HERMA basic applicator in the integrated in the Contact Us.



 Inquiry - HERMA BASIC